Grounding Product Tester Kit 接地產品測試套裝

Grounding Product Tester Kit 接地產品測試套裝

美國earthing.com正版行貨

套裝包括：接地產品測試器1件、⾹港掣式插頭1件、接地線1件

Kit includes: 1 Grounding Product Tester, 1 Hong Kong adaptor, 1 coil cord

Product Description 

With the Earthing Product Tester you can test your Earthing products to make sure they are fully conductive at any time!

產品描述

使用接地產品測試器，您可以隨時測試您的接地產品！

 How to Use

STEP 1: Set Up The Earthing Product Tester

The batteries for the Earthing Product Tester come already installed. Press down on the "PRESS" button on the tester. You should see the green indicator light flash quickly on and off to show the batteries are working.
Check your wall outlet with an Outlet Checker (not included) to ensure you have a grounded outlet. Next, plug the Safety Adapter (included with this kit) into your grounded wall outlet. If you are using a Ground Rod, connect the metal prong of the Safety Adapter to the end of the Ground Rod cord.
Snap Coil Cord #1 (included with this kit) onto the front of the Product Tester. Plug the other end of Coil Cord #1 into the Safety Adapter.
Snap Coil Cord #2 (included with your Earthing or Ground Therapy product) onto your grounding product. Plug the other end of Coil Cord #2 into the Safety Adapter
Place the tester on to the product, press the PRESS button and the green light will appear.

STEP 2: Test The Conductivity Of Your Earthing Product

DIRECT TESTING: Place the Product Tester firmly onto the conductive surface of your Earthing or Ground Therapy product. Press and hold down the "PRESS" button on the tester. A solid green light in the indicator window shows that your product is conductive and ready to ground you.

TESTING THROUGH A SHEET: Add a drop of water onto your sheet. As a standard sheet is not conductive on its own, this mimics the moisture from our body's natural perspiration that is created over time and adds conductivity when contact is made with the sheet. Next, firmly place the Product Tester against the area where you placed the drop of water and press and hold down the "PRESS" button. A solid green light in the indicator window shows that your product is conductive and ready to ground you.

What also helps to perform an accurate test is to place either your hand or a solid, flat surface, such as a book, underneath the mat itself to ensure that you can achieve full contact across the sensor plate of the tester and use a decent amount of pressure to mimic our body weight pressing into the bed.

If you have followed the instructions above and are still having trouble finding a positive result, please let me know and I will be right here to help troubleshoot with you!

Here is a very easy way to test when you are in bed:

1) Place your plugged-in tester on your nightstand

2) Go to bed wearing only t-shirt and underpants

3) Wait for 5 minutes

4) After 5 minutes take the tester and ONLY test your index finger

5) If your index finger is testing green your whole body is grounded

接地用品 Grounding Products FAQs